WISMEC Reuleaux RX300 TC Box Mod
WISMEC Reuleaux RX300, is a new masterpiece from WISMEC, designed by Jaybo, Powered by four replaceable 18650 batteries, the WISMEC can reach up to 300W output power. Together with stainless steel spring-loaded 510 thread and 0.96-inch display, Reuleaux RX300 will bring a great vaping experience to you. Available in Black and Silver. In addition to the fashionable colors and changeable stickers for your preference, the upgradeable firmware also makes it popular and up-to-date.
Thread Type: 510 spring loaded thread
Cell type: High-rate 18650 cell
Cell type: (discharge current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR Mode
Output Wattage: 1-300W
Resistance Range: 0.05-1.5ohm for TC modes
Resistance Range: 0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 1.5A
Maximum Output Current: 50A
Reuleaux RX300 comes with
1pc Reuleaux RX300(no cells)
1pc QC USB Cable
1pc Warning Card
1pc User Manual
1. 300W Maximum Output with Four 18650 Cells: Powered by four replaceable 18650 cells, the maximum output can reach 300W, providing you with a huge amount of vapor.
2. Brand-new Interface with Separate Battery Bars: The user-friendly interface with 0.96inch OLED screen presents all parameters clearly. And the battery status can be vividly displayed through the four separate bars.
3. Flip-open Battery Cover for Easy Exchange: The unique design of battery cover enables you to replace the cells with great ease.
4. Dual Circuit Protection & Reverse Polarity Protection: Reverse polarity protection is effectively achieved by the application of special battery anti reverse circuit in the circuit board. And the equipped dual circuit protection systems make the RX300 much safe and reliable.
5. Changeable Stickers for Decoration: Two editions are available, you can change the colorful sticker and decorate the device to your preference.
6. Upgradeable Firmware with Preheat Function: With an upgradeable firmware, custom logo and preheat function are available.
7. Innovative RC Adapter: The newly introduced reverse charging adapter serves as a power bank, providing power to electronic equipment when necessary.
The Setting of TCR Mode: In powered-off state, keep pressing the fire button and right regulatory button simultaneously, then you enter into the TCR set menu:
(1). Press the left or right regulatory button to choose among TCR M1, M2 AND M3;
(2). Press the fire button to confirm the mode you chosen;
(3). Press the left or right regulatory button to increase or decrease the paremeter according to the TCR of coil;
(4). Keep pressing the fire button or leave the interface for about 10 seconds to confirm.
Following is the TCR value range for your reference:
|Material||TCR Value Range|
Note: 1. The TCR value in the sheet 10⁵ multiplied of the actual TCR.
2. The TCR value range is 1-1000.